Option Description
Wi-Fi List Shows a list of available Wi-Fi networks.
Autoconnect Selects On to connect to the specified Wi-Fi
automatically when it’s available
Join Other Network Specifies the network name manually in the SSID
field.
9. Optional: Select Skip to ignore provisioning server settings, or select Provisioning Mode and
choose one of the following options:
▪ Disable: Disables the provisioning mode.
▪ Auto: Gets the provisioning server URL from your DHCP option 66 or 150.
▪ Manual: Configure the following parameters:
Parameter Description
Server Type Select a server type from the drop-down list:
Choose Polycom Provisioning Services for PDMS-E or Polycom
RealPresence Resource Manager.
Choose HTTPS Server and FTPS Server for your own provisioning
server.
Server Address Specifies the server address
User name and
Password
Specifies the user name and password to log in to the provisioning
server
10. Select Finish.
View Studio Information
You can view the basic information for your Poly Studio USB device through Polycom Companion.
Procedure
1. Connect the Poly Studio USB device to your computer, then select the Poly Studio tile in Polycom
Companion.
2. In the Status section, view the basic information for your Poly Studio USB device.
3. Optional: If you see the following warning message in the Status section, contact Poly Support to
report the issue and the values of the Device Diagnostic Code field: There is an internal
issue with your device. Please contact Poly support.
If there is no warning message, you can ignore the Device Diagnostic Code field.
Managing the Studio USB Device
9
To Next Page
Loading...
Need help?
General
