Studio USB device defines the audio fence zone in a beam shape with three width options. The system
picks up sounds within the beam region and sends only those sounds to the far end.
Procedure
1. Connect the Studio USB device to your computer, then select the Poly Studio tile from your
Polycom Companion.
2. Go to User Settings > Audio Settings.
3. Select one of the following options for Acoustic Fence:
▪ Off: Disable Acoustic Fence
▪ Wide: Set a 120-degree beam region
▪ Medium: Set a 90-degree beam region
▪ Narrow: Set a 60-degree beam region
Enable Stereo Audio for Skype for Business
When you enable stereo audio for Skype for Business, the Skype for Business audio outputs are stereo.
The item is available when you enable the Stereo option.
This feature is available in the Windows version of Polycom Companion only.
Procedure
1. Connect the Studio USB device to your computer, then select the Poly Studio tile from your
Polycom Companion.
2. Go to User Settings > Audio Settings.
3. Set the option Stereo for Skype for Business to On.
Studio Admin Settings
You can configure Wi-Fi and Bluetooth, provision the Poly Studio server, restart or factory reset the
device, and import or export configuration files through the admin settings menu.
Caution: Don’t plug out the USB cable or power cable of the Studio USB device while changing the its
settings on the Polycom Companion. This may cause unexpected errors.
Log In to Studio Admin Settings
You must enter the admin password to log in to the Admin Settings menu.
Procedure
1. Connect the Studio USB device to your computer, then select the Poly Studio tile in Polycom
Companion.
2. Select Admin Settings.
3. Enter the admin password in the Password field (the default password is Polycom12#$).
4. Select Sign In.
Change Your Password
Poly requires that you change your device’s password from the default for security reasons.
Managing the Studio USB Device
14
To Next Page
Loading...
Need help?
General
