Export a Configuration File to Your Local System
You can export the EagleEye Cube configuration file from Polycom Companion to your local system.
Procedure
1. Connect the EagleEye Cube USB device to your computer, then select the Poly EagleEye Cube
tile in Polycom Companion.
2. Go to Admin Settings > Configuration.
3. Select Export and select a directory to save the configuration file to.
4. Select Save.
Import a Configuration File
You can import a configuration file from your local system to the EagleEye Cube USB device.
Procedure
1. Connect the EagleEye Cube USB device to your computer, then select the Poly EagleEye Cube
tile in Polycom Companion.
2. Go to Admin Settings > Configuration.
3. Select Import.
4. Select the local configuration file you want to import.
5. Select OK.
6. Restart the EagleEye Cube USB device to make the change effective.
Configuring Miscellaneous Settings
You can configure EagleEye Cube USB device microphone, and stereo audio through Polycom
Companion.
Enable Windows 7 Compatible Mode
Enable Windows 7 Compatible Mode to get a better video conferencing experience while using the
EagleEye Cube USB device on a Windows 7 platform.
Procedure
1. Connect the EagleEye Cube USB device to your computer, then select the Poly EagleEye Cube
tile in Polycom Companion.
2. Go to Admin Settings > Admin Settings > Miscellaneous.
3. Set Compatible Mode to On.
4. Restart the EagleEye Cube USB device to make the change effective.
Enable Microphones to Transmit Audio
The EagleEye Cube USB device has two integrated microphones used to transmit audio. You can also
use them to Transmit audio.
The default value for this setting is Off. You must enable this setting to Transmit audio.
Procedure
1. Connect the EagleEye Cube USB device to your computer, then select the Poly EagleEye Cube
tile in Polycom Companion.
2. Go to Admin Settings > Admin Settings > Miscellaneous.
3. Set Enable Microphone to On.
Managing the EagleEye Cube USB Device
39
To Next Page
Loading...
Need help?
General
