QSC MP-M User Manual

25
TD-001578-01-C
Output − Music On Hold (MoH)
The MP-M has the ability to route an input signal to a
dedicated Music on Hold output that can be connected to a
telephone system.
Note that the MoH output audio bandwidth has been
deliberately limited to reduce distortion that may
occur if excessive low-frequency signal is sent to a
telephonesystem.
1. Select Source – Touch a source from the
scrollablelist.
2. Adjust the level control to the desired output level.
Touch
Outputs
Touch
Music On Hold
Touch
Setup
Music On Hold
1
2

QSC MP-M Specifications

General

Brand	QSC
Model	MP-M
Category	Music Mixer
Language	English