QTech QSW-2800 series User Manual

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
257
Multicast configuration:
Same as scenario 1
MLD Snooping interception results:
Same as scenario 1
35.1.4 MLD Snooping Troubleshooting
In configuring and using MLD Snooping, the MLD Snooping server may fail to run properly due
to physical connection failure, wrong configuration, etc. The user should ensure the following:
Ensure the physical connection is correct
Ensure the MLD Snooping is enabled under global mode (using ipv6 mld snooping)
Ensure the MLD Snooping is configured on the vlan under global mode (using ipv6 mld
snooping vlan <vlan-id>)
Ensure there is a vlan configured as a L2 general querier, or there is a static mrouter
configured in a segment,
Use command to check if the MLD snooping information is correct

QTech QSW-2800 series Specifications

General

Brand	QTech
Model	QSW-2800 series
Category	Switch
Language	English