QTech QSW-2800 series User Manual

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
310
[no] dosattack-check icmp-attacking
enable
Enable/disable the prevent ICMP fragment
attack function.
dosattack-check icmpv4-size <size>
Configure the max permitted ICMPv4 net load
length. This command has not effect when used
separately, the user have to enable the
dosattack-check icmp-attacking enable.
41.3 Security Feature Example
Scenario:
The User has follows configuration requirements: the switch do not forward data packet whose
source IP address is equal to the destination address, and those whose source port is equal to
the destination port. Only the ping command with defaulted options is allowed within the IPv4
network, namely the ICMP request packet can not be fragmented and its net length is normally
smaller than 100.
Configuration procedure:
Switch(config)# dosattack-check srcip-equal-dstip enable
Switch(config)# dosattack-check srcport-equal-dstport enable
Switch(config)# dosattack-check icmp-attacking enable
Switch(config)# dosattack-check icmpV4-size 100

QTech QSW-2800 series Specifications

General

Brand	QTech
Model	QSW-2800 series
Category	Switch
Language	English