QTech QSW-2800 series User Manual

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
389
Chapter 58 Summer Time Configuration
58.1 Introduction to Summer Time
Summer time is also called daylight saving time, it is a time system for saving energy sources.
In summer the time is advanced 1 hour to keep early hours, reduce the lighting, so as to save
electrolighting. The rule that adopt summer time is different in each country. At present, almost
110 countries implement summer time.
Compare with the standard time, usually set summer time 1 hour late, for example, when
summer time is implementing, 10:00 am of the standard time is considered 11:00 am of
summer time.
58.2 Summer Time Configuration
Task Sequence
1. Configure absolute or recurrent time range of summer time
Command
Explanation
Global Mode
clock summer-time <word> absolute
<HH:MM> <YYYY.MM.DD> <HH:MM>
<YYYY.MM.DD> [<offset>]
no clock summer-time
Set absolute time range of summer time, start
and end summer time is configured with
specified year.
clock summer-time <word> recurring
<HH:MM> <MM.DD> <HH:MM> <MM.DD>
<offset>]
no clock summer-time
Set recurrent time range of summer time,
every year the summer time begins from the
start time and end at the end time.
clock summer-time <word> recurring
<HH:MM> <week> <day> <month>
<HH:MM> <week> <day> <month>
[<offset>]
no clock summer-time
Set recurrent time range of summer time,
every year the summer time begins from the
start time and end at the end time.
58.3 Examples of Summer Time
Example1:

QTech QSW-2800 series Specifications

General

Brand	QTech
Model	QSW-2800 series
Category	Switch
Language	English