QTech QSW-2800 series User Manual

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
365
52.2 ULPP Configuration Task List
Create ULPP group globally
Configure ULPP group
Show and debug the relating information of ULPP
1. Create ULPP group globally
2. Configure ULPP group
Command
Explanation
ULPP group configuration mode
preemption mode
no preemption mode
Configure the preemption mode of ULPP group.
The no operation deletes the preemption mode.
preemption delay <integer>
no preemption delay
Configure the preemption delay, the no operation
restores the default value 30s.
control vlan <integer>
no control vlan
Configure the sending control VLAN, no
operation restores the default value 1.
protect vlan-reference-instance
<instance-list>
no protect vlan-reference-instance
<instance-list>
Configure the protection VLANs, the no operation
deletes the protection VLANs.
flush enable mac
flush disable mac
Enable or disable sending the flush packets
which update MAC address.
flush enable arp
flush disable arp
Enable or disable sending the flush packets
which delete ARP.
description <string>
no description
Configure or delete ULPP group description.
Port mode
ulpp control vlan <vlan-list>
no ulpp control vlan <vlan-list>
Configure the receiving control VLANs, no
operation restores the default value 1.
ulpp flush enable mac
ulpp flush disable mac
Enable or disable receiving the flush packets
which update the MAC address.
ulpp flush enable arp
ulpp flush disable arp
Enable or disable receiving the flush packets
which delete ARP.
Command
Expalnation
Global mode
ulpp group <integer>
no ulpp group <integer>
Configure and delete ULPP group globally.

QTech QSW-2800 series Specifications

General

Brand	QTech
Model	QSW-2800 series
Category	Switch
Language	English