Network/PC LAN Cable picture above
Follow the additional precautions below:
• Avoid using your system during an electrical storm; as there may be a risk of
electrical shock from lightning.
• Do not install LAN connectors in a wet location.
• Disconnect the LAN cable from the wall before moving your system.
How to Disconnect your Mailing System
1.
Press (at the top right corner of the control panel).
A short press on the sleep/on/soft off mode button sets the machine to sleep
mode.
A long press on the sleep/on/soft off mode button sets the machine to soft off.
The light located next to the key indicates:
- Green: The mailing system is in awake mode and ready for use.
- Amber (continuous): The mailing system is in sleep mode (low-power mode).
- Amber (blinking): The mailing system is in soft off mode (very low power
mode).
2.
Be sure that the light located next to the key (at the top right corner of the
control panel) is amber meaning that the mailing system is in sleep mode.
3. Turn off your mailing system. The circle (or O) indicates the system is off.
4. Unplug the power cord from the wall outlet.
5. Unplug the LAN cable from the socket as it may still be energized.
6
| Page 6 | Apr-28-2023 03:14 |
1
Safety Information
To Next Page
Loading...
Need help?
General
