To change the period of time after which the mailing system
switches to sleep mode, see How to Adjust the Timeout on page
179.
1.
Press (at the top right corner of the control panel).
- A short press on the sleep/on/soft off mode button sets the machine to
sleep mode.
- A long press on the sleep/on/soft off mode button sets the machine to soft
off.
The light located next to the key indicates:
- Green: The mailing system is in awake mode and ready for use.
- Amber (continuous): The mailing system is in sleep mode (low power mode).
- Amber (blinking): The mailing system is in soft off mode (very low power
mode).
To avoid weighing errors, make sure the weighing device
platform is clear when starting the machine.
When the mailing system is in Soft off mode, it is able to
automatically wake up to perform automatic call if scheduled
date and time is reached.
How to Turn the Mailing System to Off Mode
To turn off your system, you can use the on/off button located on the right side of the
Base.
1. Turn your system to sleep mode (see How to Turn the Mailing System to Sleep/Soft
Off Mode on page 21).
2.
Be sure that the light located next to the key (at the top right corner of the
control panel) is Amber meaning that the mailing system is in sleep mode.
22
| Page 22 | Apr-28-2023 03:14 |
2
Meet Your Mailing System
To Next Page
Loading...
Need help?
General
