Quantum DXi V-Series User Manual

Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-09 Rev B
February 2014
CLI Error Codes 5
•Typing syscli help --<cmd> will show syntax for all commands named
<cmd>. For example, syscli help --list shows all list commands, syscli help
--add shows all --add commands.
•Typing syscli help --<cmd> <subcmd> will show detailed help for this
specific command. For example, syscli help --list nas shows the complete
help for the --list nas command.
CLI Error Codes
If the system encounters an error when you run a command, an error code is
returned. To view the error code information associated with an error, use the
following command:
syscli --get error --value <error_code>
The error code information can help you determine what situation led to the
error. For example, if the system returns error code E100001, use the following
command to see the associated error code information:
syscli‐‐geterror‐‐valueE1000011
Outputdata:
ErrorMessage=CIFSserverisdisabled!(E1000011)
Commandcompletedsuccessfully.
CLI Special Options
Every command can accept these options:
• --outfile <output_filename>
• --errfile [<error_filename>]
• --file <options_filename>
• --lockwait <seconds>
The first two options are supported because the shell capability of redirecting
the standard output and standard error using the “>” character is forbidden in
the restricted shell.
CLI command options:
• --outfile specifies that the standard output will be saved to file
<output_filename>.
• --errfile specifies that the standard error will be saved to file
<error_filename>. If <error_filename> is not specified, it will be saved to
the same <output_filename>.
The third option is supported to avoid the problem of quoting and/or escaping
special characters. The option --file tells the program to open the file

Quantum DXi V-Series Specifications

General

Brand	Quantum
Model	DXi V-Series
Category	Storage
Language	English