Quantum DXi V-Series User Manual

Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-09 Rev B
February 2014
18 VTL Configuration CLI Commands
Listing Devices syscli --list device --name <VTL_name>
This CLI command allows the CLI admin to display a list of devices on the
system. The list includes the type of device (VMC or VTD), serial number of the
device and the virtual tape library name the device is in. An example output of
devices on the system is shown below.
Listofdevices:
Totalcount=3
[device=1]
vtlname=MyVTL
type=VMC
serial=VL01SV0825BVA04501
[device=2]
vtlname=MyVTL
type=VTD
serial=VL01SV0825BVA04501
[device=3]
vtlname=MyVTL
type=VTD
serial=VL01SV0825BVA04501
Listing the SAN Client
Group
syscli --list sanclientgroup [--vtlname <VTL_name>]
This CLI command allows the CLI admin to display a list of existing SAN client
group(s) on the system. The list returned contains the virtual tape library name,
group name, host, target and devices associated with the group. If a virtual
library name is specified, this CLI lists only the group associated with the virtual
tape library.
An example output of a SAN client group is shown below.
ListofSANclientgroups:
Totalcount=1
[group=1]
vtlname=MyVTL
groupname=Group1
host=
target=
totaldevicecount=2
[device=1]
type=VMC

Quantum DXi V-Series Specifications

General

Brand	Quantum
Model	DXi V-Series
Category	Storage
Language	English