Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-09 Rev B
February 2014
64 Scheduler CLI Commands (DEPRECATED)
• --instances: If specified, all instances matching the specified data will be
returned. This is the default option.
• --series: If specified, only the series (or parents) events will be returned.
• --type: Get specific type of events that are scheduled. If not specified, all
types will be displayed.
• --start: Start date in the format yyyy/mm/dd, or yyyy-mm-dd. Note that time
is not specified so all instances on the date will be shown.
If --start is not specified, events starting with today will be displayed.
• --end: End date in the format yyyy/mm/dd, or yyyy-mm-dd.
If --end is not specified, all events for 30 days will be displayed.
• --desc: Locate events that match a description. Can be a string fragment.
Spaces are allowed, but quotes for the <event name> are required.
• --bw: Locate events with a specific bandwidth.
• --emailtype: Locate events with a specific email report type.
• --repname: Locate events with a specific replication name.
• --reptarget: Locate events with a specific replication target.
• --recurrence: Locate events with a recurrence pattern. Can be a string
fragment.
If --series is used, the parent events (or the series) will be returned. Any
specification of the start or end will be ignored with --series. As part of the
output, recurrence information will be displayed. This string can be cryptic to
interpret. The following example will help clarify the results:
Example output:
Outputdata:
Totalitems=2
[Eventnumber=1]
id=4@22363860
desc=Descriptionforevent
hasexception=no
type=reclamation
target=10.40.164.17
start=MonJul904:00:002012
recurrence=FREQ=WEEKLY;BYDAY=MO,WE,FR
[Eventnumber=2]
id=3@22361460
name=
hasexception=no
type=emailreports
report=config
To Next Page
Loading...
Need help?
General