4-62 Keypad controls and menus
4 Press the + or – key until the desired setting is displayed. Available
options are On or Off.
5 Press the SELECT key to confirm your choice.
Note: Do not select Append Flag or Set as Flag in Custom QuickLabel if the
flag is enabled via the front panel.
Note: The flag is counted as a batch of two tags (the long and the short tag).
If the batch counter is enabled, the flag will appear as a batch of two labels
printing; if the total counter is enabled, the flag is counted as two additional
tags.
Note: The Cutter Flag option is not available when using the QLS Windows
Printer Driver. Since batches cannot be queued when using the driver, there
will always be a leader of media cut between batches.
To Next Page
Loading...
Need help?
General
