Q150T Sample Preparation System
Q150T - Instruction Manual 49 10473 - Issue 5
3. When you edit a value, click on the OK button to confirm the change or on the
Cancel button to restore the previous value.
4. Edit other parameters as required.
5. Back on the Hardware page, click on the OK button to confirm the changes or on
the Cancel button to restore the previous values.
6.3 User Management
The Q150T software does not employ a user account system with individual login names
and passwords. Instead, users are granted access privileges at a group level. The lowest
security group: User, is not password protected. In this mode, a user can run the
instrument for sputtering or evaporation and create or edit profiles. The second security
group Administration is password protected with the password admin. In this level, it is
possible to edit a number of hardware settings. It is also possible to create further user
groups with customised privileges for instrument use.
6.3.1 Changing User Group
When first switched on, the Q150T starts in User group mode.
If you want to change to Administration level:
1. Select Edit | User | Level from the menu bar. The Edit User Level dialog box is
displayed (see Figure 6-8).
2. Select the Administration option button.
3. Tap on the Access Code text box. Use the on-screen keyboard (see Figure 4-3) to
enter the password: admin.
4. Tap on the OK button. Alternatively, tap on the Cancel button to close the on-
screen keyboard without entering the password.
5. Back in the Edit User Level dialog box, tap on the OK button. Alternatively, tap on
the Cancel button to return to the standby screen without changing the user level.
Figure 6-8. Changing the user level
If you want to change back to User level:
1. Select Edit | User | Level from the menu bar. The Edit User Level dialog box is
displayed (see Figure 6-8).
2. Select the User option button.
3. Tap on the OK button. Alternatively, tap on the Cancel button to return to the
standby screen without changing the user level.
To Next Page
Loading...
Need help?
General
