Network operation and remote control
R&S
®
LCX Series
155User Manual 1179.2260.02 ─ 02
Using an FTP client application on a computer, you can access the internal memory or
a connected USB memory stick of the R&S LCX. The connection enables you to trans-
fer files with operating data, saved device settings, measurement data files or docu-
ments from or to the device.
The file access (access-transparency) depends on the used FTP client. Therefore, it
can be necessary that you have to download a file before you can access or modify it.
Access:
1. Press the [settings] key at the front panel.
2. In the device settings menu, select "Interfaces".
3. Select "Network".
4. Select "FTP".
Figure 10-6: FTP settings dialog
For accessing the R&S
LCX over FTP, you must assign a port address, a user
name and password to activate the connection.
How to: see "Assigning the VNC port manually" on page 160.
Settings
Enabled.......................................................................................................................155
FTP Port......................................................................................................................155
User name...................................................................................................................156
Password.................................................................................................................... 156
Enabled
Activates remote access over the FTP port.
FTP Port
Sets the port number for remote access, using an FTP client application.
Remote access settings
To Next Page
Need help?
General
