Getting started
R&S
®
LCX Series
36User Manual 1179.2260.02 ─ 02
Touch and swipe: Scrolls through the contents of a display element larger than
the screen, e.g. a menu list.
– Dragging
Touch and drag: Shifts the contents from one position to another on the display.
By dragging your finger over a diagram, you can pan the displayed area of the
diagram to show results that were previously out of view.
●
System, measurement and function keys
The front panel hardkeys provide nearly all functions and controls to operate the
instrument in the classic way, without touchscreen.
You can access the main functions and parameters, measurement and display
modes and configure general instrument settings. When selected, i.e. a function is
active, the corresponding function key lights up white.
●
Navigation controls
The navigation controls include a [rotary knob] and right [▶], left [◀] keys.
The rotary knob allows you to navigate on the home screen or in dialogs, and to
set parameters. The [◀] [▶] move the cursor in entry fields.
This manual describes the manual interaction with the instrument using the touch-
screen. It mentions the alternative methods using the keys on the instrument or the on-
screen keypads if it deviates from the standard operating procedures.
Throughout the manual, the term "select" refers to any of the described methods, i.e.
using a finger on the touchscreen or a key on the instrument or on a keyboard.
For basic instructions on how to control the R&S LCX, see Chapter 4.4.2.2, "Accessing
the functionality", on page 43.
4.4.2.1 Understanding the display information
The initial display screen shows the measurement result window, status information
and general settings at the top. The main area displays the measurement results,
depending on the selected measurement and display mode.
For detailed information, see Chapter 8.2, "Display mode", on page 69.
Instrument control
To Next Page
Loading...
Need help?
General
