016-4010-001 Rev. J 11
CALIBRATION - HDU-SPECIFIC, MD, AND STEERING-READY
RS1 TERMS OF USE
FIGURE 2. Operator Liability Page
Read and accept the Operator Liability Warning. If the operator does not accept liability, the RS1 system will
disable and cannot be reengaged until the liability warning is accepted. The Operator Liability Warning prompt
will display each time a steering partner is registered with the RS1.
GPS AND STEERING CALIBRATION
NOTE: The System Information, diagnostic trouble codes (DTCs), Feature Unlock, and Machine Test pages
may be viewed during calibration. For further information on these settings, refer to the following
sections of this manual:
• System Information section on page 76
• Diagnostic Trouble Codes (DTC) section on page 58
• Feature Unlock Codes section on page 49
• Machine Test
NOTE: The machine test pages provide additional diagnostics capabilities and allow the operator to test
function of various machine controls and sensors.
To Next Page
Loading...
Need help?
General
