Raven RS1/HDU User Manual

10
016-4010-001 Rev. J 55
DIAGNOSTICS AND TROUBLESHOOTING
RESUME SWITCH
The status of the enable switch (e.g. foot switch) used to engage the steering system.
DISENGAGE SENSOR
Status of the pressure sensor used to disable steering when the steering wheel is turned.
WHEEL ANGLE SENSOR
Displays the status of the position sensor.
Display Message
The resume switch is set in the OFF position.
The resume switch is in the ON position.
Display Message
The SC1/TC1 disengage sensor is active. The SC1/TC1 system cannot be
enabled.
The SC1/TC1 disengage sensor is out of range or disconnected.
The SC1/TC1 disengage sensor is inactive. The SC1/TC1 system can be
enabled.
Display Message
The wheel angle sensor (WAS) is out of range or disconnected.
Wheel angle sensor (WAS) is not calibrated.
The wheel angle sensor (WAS) is calibrated and ready to operate.

Raven RS1/HDU Specifications

General

Brand	Raven
Model	RS1/HDU
Category	Control Systems
Language	English