22
1 Press REMOTE SET UP and 1 at the same time to select the pre-
set mode.
The LED on the remote control starts to blink.
To cancel the preset mode at any time
Press REMOTE SET UP.
2 Press the MULTI CONTROL button for the component you want
to control.
Each button can be set to control one of the following compo-
nents
DVD/LD : DVD or LD player
TV/SAT : TV or Satellite tuner
VCR/DVR : VCR or Digital Video Recorder
CD : CD player
CD-R/TAPE/MD : CD Recorder or Tape deck or MD
player
TV/CONT : TV or Cable TV tuner
The LED lights steadily and the first manufacturer (and preset
code(s)) appear in the display.
If no commands are entered the receiver automatically exits the
preset code mode after 20 seconds.
3 Press 5 or ∞ repeatedly to display the name of the component’s
manufacturer.
If necessary, press 2 or 3 to see if an alternative code from the
same manufacturer is available.
A list of all available preset codes is provided on page 43.
If no commands are entered the receiver automatically exits the
preset code mode after 20 seconds.
SETTING UP THE REMOTE CONTROL
In addition to controlling the receiver, the supplied remote control can operate your other components
(DVD, MD, VCR, TV, LD, CD, etc.). If your component(s) are listed in the “Preset Code List” on page 43,
simply recall the corresponding preset code.
Recalling preset codes
The following steps show you how to recall preset codes for each MULTI CONTROL button. Once the
preset code is assigned, pressing the button will automatically set the remote to operate the respective
component.
• Refer to “Preset Code List” on page 43 for the components and manufacturers available.
• Refer to “Controlling the Rest of Your System” on pages 36 to 40 for detailed explanations
on how to operate your other components.
1,4
2
1
3
LED
2
memo
MULTI CONTROL
DVD/LD TV/SAT VCR/DVR CD
LOUDNESS FUNCTION MUTING
RECEIVER
D.ACCESS CHANNEL
ATT
VOL
MENU
TOP
MENU
VOL
CH
2
DSP MODE
MIDNIGHT
5.1CH
CD-R/
TAPE/MD
CHANNEL
SELECT
CHANNEL
LEVEL
EFFECT
ENTER
ENTER
FQ
FQ
ST ST
FL
DIMMER
REMOTE
SETUP
MASTER
VOLUME
TV CONTROL
FUNC
10 DISC
SIGNAL
SELECT
TEST
TONE
RECEIVER
TUNER
TV CONT
1234
1 ¡ 4 ¢
7 8 3
5678
90
‡
SOURCE CLASS MPX BAND
PREPROGRAMMED
AUDIO/VIDEO SYSTEM REMOTE
POWER
POWER
POWER
OSR
dB
dB
\\
dB
dB
To Next Page
Loading...
Need help?
General
