REPLIGEN Spectrum KR2i User Manual

16 400-12355-000 Rev. 03
KR2i / KMPi TFF Systems
Setup and Operation
7.3 C. Mode Setup
1. Auxiliary Pumps
a. (Optional) To control permeate rate, connect auxiliary pump to the Auxiliary
Component Cable’s “Auxiliary Pump 2” port
b. (Optional) Connect Auxiliary Pump 2's power cable
2. Auxiliary Scales
a. Connect scale to the Auxiliary Component Cable’s “Permeate Scale”
7.4 C/D and C/D/C Mode Setup
NOTE: Permeate Pump is optional and shown in the diagram as an example for applications that
require permeate control.
1. Auxiliary Pumps
Feed Reservoir
KMPi Pump
Permeate Reservoir
Diafiltration Buffer Reservoir
Module
Diafiltration Pump
(Auxiliary Pump 1)
Feed Scale
Permeate Reservoir
Permeate Pump
(Auxiliary Pump 2)
Permeate Scale
Module
KMPi Pump
Feed Reservoir
Permeate Scale

REPLIGEN Spectrum KR2i Specifications

General

Brand	REPLIGEN
Model	Spectrum KR2i
Category	Laboratory Equipment
Language	English