REPLIGEN Spectrum KR2i User Manual

20 400-12355-000 Rev. 03
KR2i / KMPi TFF Systems
Setup and Operation
7.8 Ctrl Mode
NOTE: Refer to section 8.2.1.7 and 8.3 for further information about Ctrl Mode.
1. Auxiliary Pumps
a. Connect auxiliary pump (optional permeate pump) to the Auxiliary Component
Cable’s “Auxiliary Pump 2” port
d. Connect auxiliary pump power cables
2. Auxiliary Scales
a. Connect first scale to the Auxiliary Component Cable’s “Feed Scale” port and second
scale to the Auxiliary Component Cable’s “Permeate Scale” port
7.9 System Setup Using KF Comm Pump Control Window
7.9.1 KF Comm User Interface
The Pump Control Interface can be used to interact with all the features of the system. This screen
will appear when the KF Comm software is opened in Excel. When needed, the functions and
setpoints are accessible on the main pump display. For full explanation of Pump Control window
please refer to section 8.1 KF COMM Pump Control User Interface.
Below is the basic layout of the Pump Control window:
Feed Reservoir
KMPi Pump
Permeate Reservoir
Diafiltration Buffer Reservoir
Module
Feed Scale
Permeate Pump
(Auxiliary Pump)
Permeate Scale

REPLIGEN Spectrum KR2i Specifications

General

Brand	REPLIGEN
Model	Spectrum KR2i
Category	Laboratory Equipment
Language	English