Ricoh Aficio GX7000 User Manual

5. Plug the network interface board in securely, and then secure it by turning the screw.
6. Plug the printer's power cord into a nearby wall outlet, and then turn the printer on.
If the message reappears, contact your service representative.
• p.258 "Where to Inquire"
Envelope Selector Position Mismatch
The envelope selector is in the wrong position or the printer driver settings are wrong. Set the envelope
selector to the right position or change the printer driver settings. Alternatively, press the [Form Feed /
Head-cleaning]
key, select a tray containing paper of the required size, and then print. To cancel the print
job, press the [Job Reset] key.
Check the position of the envelope selector
1. For envelopes, set the lever to the rear position ; for everything else, set the lever to
the forward position .
BAJ058S
Check the printer driver settings
1. In the application, open the printer properties dialog box.
2. Click the [Setup] tab.
3. Check the [Paper type:] setting.
Select the paper type from the [Paper type] dropdown list. For envelopes, select [Envelope].
Status Monitor Errors
239
6

Ricoh Aficio GX7000 Specifications

Power

power source	100 – 120V, 50/60Hz
power consumption	35W or less
energy saver mode	5W or less

Printing Specifications

resolution	True 1200 x 1200 dpi, 600 x 600 dpi, 600 x 300 dpi (Maximum 3600 x 1200 dpi equivalent)
printing speed	29 pages-per-minute in B&W and full-color
first print speed	B&W: 6.5 seconds or less, Color: 9 seconds or less

Paper Handling

paper capacity	250-Sheet Standard Paper Tray, 100-Sheet Multi-Bypass Tray, 250-Sheet Paper Feed Unit
maximum paper capacity	600 sheets
output capacity	100 sheets (face up)

Weight and Dimensions

dimensions	21.4" x 21.9" x 10.4" / 545 x 558 x 269 mm
weight	42.1 lbs. / 19.1 kg