Ricoh Aficio GX7000 User Manual

2. Preparing for Printing
Setting Up the Hardware
This section explains how to install the printer.
Checking the Computer and Installation Area
The printer's location should be carefully chosen because environmental conditions greatly affect its
performance.
The area where the printer is to be placed
• To avoid malfunctions, position the machine away from the following:
• direct sunlight
• flow of air from air conditioners or heaters
• radios, televisions, or other electronic devices
• areas of high/low temperature and high/low moisture
• humidifying appliances
• oil stoves and ammonia-emitting appliances (such as diazo copiers)
Choose a flat, stable area to install the machine.
• The surface should be level within two degrees, left to right and front to back.
• To prevent condensation, install the machine in an area where temperature and humidity conditions
do not exceed those indicated in the diagram below.
• The machine may cease to print if these limitations are exceeded.
31
2

Ricoh Aficio GX7000 Specifications

Power

power source	100 – 120V, 50/60Hz
power consumption	35W or less
energy saver mode	5W or less

Printing Specifications

resolution	True 1200 x 1200 dpi, 600 x 600 dpi, 600 x 300 dpi (Maximum 3600 x 1200 dpi equivalent)
printing speed	29 pages-per-minute in B&W and full-color
first print speed	B&W: 6.5 seconds or less, Color: 9 seconds or less

Paper Handling

paper capacity	250-Sheet Standard Paper Tray, 100-Sheet Multi-Bypass Tray, 250-Sheet Paper Feed Unit
maximum paper capacity	600 sheets
output capacity	100 sheets (face up)

Weight and Dimensions

dimensions	21.4" x 21.9" x 10.4" / 545 x 558 x 269 mm
weight	42.1 lbs. / 19.1 kg