Stamp
This section describes the user tools in the Stamp menu under Copier / Document Server Features.
Default settings are shown in bold type.
Background Numbering
This section describes the user tools in the Background Numbering menu under Stamp.
Size
You can set the size of the numbers.
The default setting is Normal.
Density
You can set the density of the numbers.
The default setting is Normal.
Preset Stamp
This section describes the user tools in the Preset Stamp menu under Stamp.
Stamp Language
You can select the language of the message printed in Stamp mode.
The default setting is English.
Stamp Priority
You can select the stamp type given priority when [Preset Stamp] is pressed.
The default setting is Copy.
Stamp Format
Specify how each stamp is printed.
• Stamp Position
Specify where to print the stamp.
The default setting is Top Right.
• Adjust Stamp Position
You can adjust the position of the stamp within the available ranges shown below.
• Metric version:
"Top Left" T/B: 4-144mm, L/R: 4-144mm
"Top Center" T/B: 4-144mm, L/R: 72-72mm
Stamp
115
To Next Page
Loading...
Need help?
General
