Fax Destination
This section describes how to register, change, and delete a fax destination.
Registering a Fax Destination
This section describes how to register a fax number.
1. Press [System Settings].
2. Press [Administrator Tools].
3. Press [Address Book Management].
4. Check that [Program / Change] is selected.
5. Select the name whose fax destination you want to register.
Press the name key, or enter the registered number using the number keys.
6. Press [Fax Dest.].
7. Press [Change] under "Fax Destination".
8. Enter the fax number using the number keys, and then press [OK].
9. Specify optional settings such as "SUB Code", "SEP Code", and "International TX Mode".
10. Press [OK].
11. Press [Exit].
7. Registering Addresses and Users for Facsimile/Scanner Functions
242
To Next Page
Loading...
Need help?
General
