Tray Paper Settings
This section describes the user tools in the Tray Paper Settings menu under System Settings.
Default settings are shown in bold type.
• If the specified paper size differs from the actual size of the paper loaded in the paper tray, a misfeed
might occur because the correct paper size was not detected.
Paper Tray Priority: Copier (copier/Document Server)
Specify the tray to supply paper for output.
The default setting is Tray 1.
When optional paper tray unit is installed, [Tray 3] and [Tray 4] are displayed.
When optional paper tray 3 (LCT) is installed, [Tray 3] is displayed.
When optional Large Capacity Tray (LCT) is installed, [LCT] is displayed.
Paper Tray Priority: Facsimile (facsimile)
Specify the tray to supply paper for output.
The default setting is Tray 1.
When optional paper tray unit is installed, [Tray 3] and [Tray 4] are displayed.
When optional paper tray 3 (LCT) is installed, [Tray 3] is displayed.
When optional Large Capacity Tray (LCT) is installed, [LCT] is displayed.
Paper Tray Priority: Printer (printer)
Specify the tray to supply paper for output.
The default setting is Tray 1.
When optional paper tray unit is installed, [Tray 3] and [Tray 4] are displayed.
When optional paper tray 3 (LCT) is installed, [Tray 3] is displayed.
When optional Large Capacity Tray (LCT) is installed, [LCT] is displayed.
Tray Paper Size: Tray 1-4
Select the size of the paper loaded in the paper tray.
[Tray Paper Size: Tray 3] and [Tray Paper Size: Tray 4] appear only when the optional paper tray
unit is installed.
• The paper sizes you can set for tray 1-4 are as follows:
• Metric version:
"Auto Detect", "A3 ", "B4 JIS ", "A4 ", "A4 ", "B5 JIS ", "B5 JIS ", "A5 ", "11 17
", "11 15 ", "10 14 ", "8
1
/
2
14 ", "8
1
/
2
13 ", "8
1
/
2
11 ", "8
1
/
2
11 ",
Tray Paper Settings
63
To Next Page
Loading...
Need help?
General
