6. Scanner Features
This chapter describes user tools in the Scanner Features menu. For details on how to access Scanner
Features, see "Accessing User Tools".
General Settings
This section describes the user tools in the General Settings menu under Scanner Features.
Default settings are shown in bold type.
Switch Title
Select the title to be shown on the destination list.
The default setting is Title 1.
Update Delivery Server Destination List
Press [Update Delivery Server Destination List] to update the receivers from the delivery server. To use
this function, it is necessary to set [Delivery Option] to [On].
For details about "Delivery Option", see "File Transfer".
Search Destination
Select a destination list to be used in "Search Destination".
To search from LDAP server, it is necessary to register the LDAP server in [System Settings] and set
[LDAP Search] to [On].
The default setting is Address Book.
For details about "LDAP Search", see "Administrator Tools".
TWAIN Standby Time
When the machine is being used to send e-mail or a file, or functioning as Document Server or a
network delivery scanner, a scanning request to the machine as a TWAIN scanner will switch the
machine to the network TWAIN scanner function. This setting determines the delay until the machine
switches to the network TWAIN scanner function.
The default setting is Set Time, 10 second(s).
When [Immediate] is selected, the machine will switch to the network TWAIN scanner function at
once.
When [Set Time] is selected, you can enter the delay time with the number keys (3-30 seconds). The
machine will switch to the network TWAIN scanner function when the time set here passes after the
last key operation.
Destination List Display Priority 1
Select a destination list to be displayed when the machine is in the initial state.
You can select either [E-mail / Folder] or [Delivery Server].
213
To Next Page
Loading...
Need help?
General
