Ricoh Aficio MP W2400 User Manual

Authentication and its Application
74
2
If User Authentication is Specified
When user authentication (User Code Authentication, Basic Authentication,
Windows Authentication, LDAP Authentication, or Integration Server Authen-
tication) is set, the authentication screen is displayed. Unless a valid user name
and password are entered, operations are not possible with the machine. Log on
to operate the machine, and log off when you are finished operations. Be sure to
log off to prevent unauthorized users from using the machine. When auto logout
timer is specified, the machine automatically logs you off if you do not use the
control panel within a given time. Additionally, you can authenticate using an
external device. For details, see p.80 “Authentication using an external device”.
Note
❒ Consult the User Administrator about your login user name, password, and
user code.
❒ For user code authentication, enter a number registered in the address book
as [User Code].
User Code Authentication (Using the Control Panel)
When user authentication is set, the following screen appears.
Enter a user code, and then press the [OK] key.
Note
❒ To log off, do one of the following:
• Press the Operation switch.
• Press the {Energy Saver} key after jobs are completed.
• Press the {Clear/Stop} key and the {Reset} key at the same time.

Ricoh Aficio MP W2400 Specifications