Basic Operation
• The original in the ADF takes precedence over the original on the exposure glass if you place
originals both in the ADF and on the exposure glass.
• When making multiple copies of a multi-page document, you can select whether copies are output
in collated sets, or in page batches in the [Sort] setting under [Copier Features].
1. Make sure that the copier mode screen is displayed.
When the fax mode screen is displayed, press the [Copy/Facsimile] key to switch to the copier
mode screen.
2. Place the original on the exposure glass or in the ADF.
3. To make multiple copies, enter the number of copies using the number keys.
4. Press the [Start] key.
• If a paper jam occurs, printing stops when the current page has printed. Open the maintenance
cover to remove the jammed paper. Printing will resume automatically after the maintenance cover
is closed. If the maintenance cover is not opened to remove jammed paper, press the [Start] key to
resume printing.
4. Copying Originals
36
To Next Page
Loading...
Need help?
General
