1. Make sure that the fax mode screen is displayed.
When the copier mode screen is displayed, press the [Copy/Facsimile] key to switch to the fax
mode screen.
2. Place the original on the exposure glass or in the ADF.
3. Press the [ ] or [ ] key to select [Redial], and then press the [OK] key.
4. Press the [Start] key.
Useful Sending Functions
You can confirm the status of the other party's machine easily before sending a fax by using the On
Hook Dial function. If you have an extra telephone, you can talk and send a fax in one call.
Sending a fax using On Hook Dial
The On Hook Dial function allows you to check the destination's status while listening to the tone from the
internal speaker. This function is useful when you want to ensure that the fax will be received.
1. Make sure that the fax mode screen is displayed.
When the copier mode screen is displayed, press the [Copy/Facsimile] key to switch to the fax
mode screen.
Sending a Fax
65
To Next Page
Loading...
Need help?
General
