EasyManuals Logo
Home>Ricoh>Printer>Aficio SP C430DN

Ricoh Aficio SP C430DN User Manual

Ricoh Aficio SP C430DN
260 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #213 background imageLoading...
Page #213 background image
Using DHCP
You can use the printer in a DHCP environment. You can also register the printer NetBIOS name on a
WINS server when it is running.
Printers that register the printer NetBIOS name on a WINS server must be configured for the WINS
server.
Supported DHCP servers are Microsoft DHCP Server included with Windows 2000 Server, Windows
Server 2003/2003 R2/2008, and the DHCP server included with NetWare and UNIX.
If you do not use the WINS server, reserve the printer's IP address in the DHCP server so the same IP
address is assigned every time.
To use the WINS server, change the WINS server setting to "active" using the control panel.
Using the WINS server, you can configure the host name via the remote network printer port.
DHCP relay-agent is not supported. If you use DHCP relay-agent on a network via ISDN, it will result
in increased line charges. This is because your computer connects to the ISDN line whenever a packet
is transferred from the printer.
If there is more than one DHCP server, use the same setting for all servers. The printer operates using
data from the DHCP server that responds first.
DHCP servers can operate in an IPv6 environment, but they cannot be configured to allocate IPv6
addresses or obtain host names.
Using AutoNet
If the printer IPv4 address is not automatically assigned by the DHCP server, a temporary IP address starting
with 169.254 and not used on the network can be automatically selected by the printer.
The IP address assigned by the DHCP server is given priority over that selected by AutoNet.
You can confirm the current IPv4 address on the configuration page. For more information about the
configuration page, see Quick Installation Guide.
When AutoNet is running, the NetBIOS name is not registered on the WINS server.
The printer cannot communicate with devices that do not have the AutoNet function. However, this
printer can communicate with Macintosh computers running Mac OS X 10.2.3. or higher.
Using DHCP
211
9

Table of Contents

Other manuals for Ricoh Aficio SP C430DN

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ricoh Aficio SP C430DN and is the answer not in the manual?

Ricoh Aficio SP C430DN Specifications

Ricoh Aficio SP C430DN

Power IconPower
power requirements120 – 127V, 60Hz
power consumption (operating)825W or less
power consumption (energy saver)110W
power consumption (sleep)6W
Print Speed and Resolution IconPrint Speed and Resolution
print speed (full-color & monochrome)37 ppm
resolution1200 x 1200 dpi
Paper Handling IconPaper Handling
standard paper supply550-Sheet Tray + 100-Sheet Bypass Tray
maximum paper capacity2, 300 sheets
output capacity500 sheets, face down
Weight and Dimensions IconWeight and Dimensions
dimensions17.48” x 25.91” x 19.29” (444 x 658 x 490 mm)
weight126 lb. (57 kg)

Ricoh Aficio SP C431DN

Power IconPower
power requirements120 – 127V, 60Hz
power consumption (operating)894W or less
power consumption (energy saver)110W
power consumption (sleep)6W
Print Speed and Resolution IconPrint Speed and Resolution
print speed (full-color & monochrome)42 ppm
resolution1200 x 1200 dpi
Paper Handling IconPaper Handling
standard paper supply550-Sheet Tray + 100-Sheet Bypass Tray
maximum paper capacity2, 300 sheets
output capacity500 sheets, face down
Weight and Dimensions IconWeight and Dimensions
dimensions17.48” x 25.91” x 19.29” (444 x 658 x 490 mm)
weight126 lb. (57 kg)

Related product manuals