Item Description
Printer Name Input the machine name. The name can have up to 32 characters.
The "product name XXX" (XXX is the last three bytes of the Ethernet Mac
address) has already been entered by default.
Location Input the location of the machine.
If you change settings for this item, those for [Location] in the [SNMP] tab
are also changed.
Latitude Input the latitude of the machine's location.
Longitude Input the longitude of the machine's location.
Altitude Input the altitude of the machine's location.
Certificate Tab
You can use the following two types of certificates on this machine:
• Certificates created by the machine.
• Certificates issued by certification authorities.
You can install only one certificate on the machine.
If you execute [Create New Self-Signed Certificate], [Create Certificate Request], [Install Certificate], or
[Import Certificate and Private Key], the existing certificate on the machine is deleted.
Follow the procedure below to set items:
1. Check the item you want to set.
2. Enter the password if required.
3. Click [Next].
Certificate
Item Description
Create New Self-
Signed Certificate
Select this item to create a new self-signed certificate.
Create Certificate
Request
Select this item to request the certification authority to issue a new
certificate. You can submit a certificate created using this setting to the
certificate authority. Note that you cannot submit a certificate to the
certification authority directly via Web Image Monitor.
Install Certificate Select this item to install the certificate issued by the certification authority.
Configuring the Network Settings
113
To Next Page
Loading...
Need help?
General