Technical Bulletin PAGE: 1/1
Reissued: 22-Dec-15
RTB Reissue
The areas outlined in red in the photos were corrected.
Please add the following caution in the field service manual in this section:
Replacement and Adjustment > Electrical Components > PSU
POWER SUPPLY UNIT:100V:280W
POWER SUPPLY UNIT:200V:280W
NEVER touch the areas outlined in red in the photos below to prevent electric shock
caused by residual charge.
Residual charge of about 100V-400V remains on the PSU board for several months
even when the board has been removed from the machine after turning off the
machine power and unplugging the power cord.
Subject: Manual correction - Caution note on PSU replacement
From: 2nd Tech Service Sec., MFP/P Tech Service Dept.
Electrical
Transmit/receive
Service manual revision
Retrofit information