Technical Bulletin PAGE: 1/1
Model: Model GR-C1 Date: 31-Jul-12 No.: RD117031
Important Information about Preventing SC492
When you install the machine, make sure to remove the orange shipping tape and move
the lever to the upper position. If you do not, SC492 will occur.
Procedure:
1. Open the front door and remove the waste toner bottle [A].
2. Remove the orange shipping tape [A] attached to the lever.
3. Move the lever [B] into its upright position.
Subject: SC492 Prepared by: T.Kiyohara
From: 3rd Tech Service Sect., MFP/P Tech Service Dept.
Classification:
Troubleshooting
Mechanical
Paper path
Product Safety
Part information
Electrical
Transmit/receive
Other ( )
Action required
Service manual revision
Retrofit information
Tier 2