Configuring the Administrator Settings
Click [Administrator Tools] to display the page for configuring the administrator settings.
This page contains the following tabs: [Administrator], [Reset Settings], [Backup Setting], [Restore
Setting], and [Energy Saver Mode].
Administrator Tab
Administrator Settings
Item Description
New Password Enter the new administrator password. Can contain up to 16 characters.
Confirm New Password Enter the same password again, to confirm.
• To change the password, it is necessary to enter the current password.
• The password must be specified during the Initial Setup, which is required after turning on the
machine for the first time. For details, see Setup Guide. Note that the password is cleared when the
settings are reset.
Reset Settings Tab
Reset Settings
Item Description
Reset Network Settings Select to clear the settings configured under the [Network Settings].
Reset Menu Settings Select to clear the settings that are not related to the network to their
defaults.
Reset Settings of
Available Functions
Select to clear the user restriction settings.
Reset IPsec Settings Select to clear the IPsec settings.
• [Reset IPsec Settings] appears only when the administrator password is specified.
Configuring the Administrator Settings
129