3. Support the paper with both hands, and insert it carefully until it stops.
Loading Envelopes
• Avoid using self-adhesive envelopes. They may cause machine malfunctions.
• Check there is no air in the envelopes before loading.
• Load only one size and type of envelope at a time.
• Before loading envelopes, flatten their leading edges (the edge going into the machine) by running
a pencil or ruler across them.
• Some kinds of envelope might cause misfeeds, wrinkles or print poorly.
• Print quality on envelopes may be uneven if parts of an envelope have different thicknesses. Print
one or two envelopes to check print quality.
• In a hot and humid environment, the envelope might be output creased or improper printing
quality.
• Load envelopes with their flaps closed.
For details about loading an envelope, see page 26 "Loading Paper into Tray1 and 2", and page 31
"Loading Paper into Bypass Tray". Note that you cannot load an envelope in Tray 2.
• If printed envelopes come out badly creased, load the envelopes in the opposite direction, and
then rotate the print object by 180 degrees using the printer driver before printing. For details, see
the printer driver Help.
• When Using Tray 1
• If the envelope flap is on a long side, place the envelope with the flap side on the right.
2. Paper Specifications and Adding Paper
32
To Next Page
Loading...
Need help?
General
Weight and Dimensions
