Modifying a Custom Paper
Before modifying a custom paper, confirm that no one is modifying it on Web Image Monitor or on the
color controller.
You can only change the [Paper Name], [Paper Size], [Apply Duplex], and [Apply Auto Paper Select]
settings for a custom paper that is registered from the master library.
1. Press [Tray Paper Settings] in the upper left corner of the screen.
2. Press [CustomPaper Management].
3. Select the custom paper whose settings you want to modify.
If the paper you want to select is not displayed, use [Jump to Row], or scroll through the screen until
the desired item is displayed.
4. Press .
5. Change the settings.
6. Press [Save Paper].
If you change the [Paper Weight], [Paper Type], [Coated Paper Type], [Paper Color],
[Prepunched], or [Textured] and press [Save Paper], a message appears to notify you that the
[Advanced Settings] will be initialized. To apply the changes for those settings, select [Change]. To
cancel the changes, select [Do not Change].
7. Press [Overwrite].
8. Press .
9. Press the [Home] ( ) icon at the center bottom of the screen.
• For details about custom paper settings, see page 35 "Custom Paper Settings".
• You cannot modify a custom paper that is assigned to a paper tray. To modify it, cancel the
assignment.
• For details about [Advanced Settings], contact your machine administrator.
Custom Paper Settings
Paper Brand
Displays brand name and data version of the custom paper registered from the master library.
Brand name and data version is displayed only for the custom paper registered from the master
library.
Manufacturer
Displays the manufacturer's name.
Registering Custom Paper
35
To Next Page
Loading...
Need help?
General
