Rigol DS1104Z Plus Programming Guide

RIGOL Chapter 2 Command System
2-124 MSO1000Z/DS1000Z Programming Guide
:MEASure:STATistic:ITEM
Syntax
:MEASure:STATistic:ITEM <item>[,<src>[,<src>]]
:MEASure:STATistic:ITEM? <type>,<item>[,<src>[,<src>]]
Description
Enable the statistic function of any waveform parameter of the specified source, or query
the statistic result of any waveform parameter of the specified source.
Parameter
Name
Type
Range
Default
<item>
Discrete
{VMAX|VMIN|VPP|VTOP|VBASe|VAMP|VAVG|
VRMS|OVERshoot|PREShoot|MARea|MPARea|
PERiod|FREQuency|RTIMe|FTIMe|PWIDth|
NWIDth|PDUTy|NDUTy|RDELay|FDELay|
RPHase|FPHase|TVMAX|TVMIN|PSLEWrate|
NSLEWrate|VUPper|VMID|VLOWer|VARIance|
PVRMS|PPULses|NPULses|PEDGes|NEDGes}
--
<src>
Discrete
Refer to Explanation
<type>
Discrete
{MAXimum|MINimum|CURRent|AVERages|
DEViation}
--
Explanation
 [,<src>[,<src>]] sets the source of the parameter to be measured.
 When <item> is PERiod, FREQuency, PWIDth, NWIDth, PDUTy, NDUTy, RDELay,
FDELay, RPHase, or FPHase, the range of <src> is
{D0|D1|D2|D3|D4|D5|D6|D7|D8|D9|D10|D11|D12|D13|D14|D15|CHANnel1|CHAN
nel2|CHANnel3|CHANnel4|MATH}.
When <item> is any of other measurement parameters, the range of <src> is
{CHANnel1|CHANnel2|CHANnel3|CHANnel4|MATH}.
 If the parameter to be measured only needs a single source (VMAX, VMIN, VPP,
VTOP, VBASe, VAMP, VAVG, VRMS, OVERshoot, MARea, MPARea, PREShoot, PERiod,
FREQuency, RTIMe, FTIMe, PWIDth, NWIDth, PDUTy, NDUTy, TVMAX, TVMIN,
PSLEWrate, NSLEWrate, VUPper, VMID, VLOWer, VARIance, PVRMS, PPULses,
NPULses, PEDGes, and NEDGes), you only need to set a single source. If
[,<src>[,<src>]] is omitted, the source is the one selected by the :MEASure:SOURce
command by default.
 If the parameter to be measured needs two sources (RDELay, FDELay, RPHase, and
FPHase), the command needs to include two sources; otherwise, the command is
invalid. If [,<src>[,<src>]] is omitted, the sources are the ones selected by
the :MEASure:SETup:DSA and :MEASure:SETup:DSB or :MEASure:SETup:PSA
and :MEASure:SETup:PSB commands by default.
Return
Format
The query returns the statistic result in scientific notation.
Example
:MEASure:STATistic:ITEM VPP,CHANnel2 /*Enable the Vpp statistic function of CH2*/
:MEASure:STATistic:ITEM? MAXimum,VPP /*The query returns 9.120000e-01*/

Rigol DS1104Z Plus Specifications

General

Brand	Rigol
Model	DS1104Z Plus
Category	Test Equipment
Language	English