Rigol DS7024 User Programming Manual

RIGOL Chapter 2 Command System
2-158 MSO7000/DS7000 Programming Guide
:TIMebase Commands
The :TIMebase commands are used to set the horizontal system. For example, enable the delayed sweep,
set the horizontal time base mode, etc.
Command List:
 :TIMebase:DELay:ENABle
 :TIMebase:DELay:OFFSet
 :TIMebase:DELay:SCALe
 :TIMebase[:MAIN]:OFFSet
 :TIMebase[:MAIN]:SCALe
 :TIMebase:MODE
 :TIMebase:HREFerence:MODE
 :TIMebase:HREFerence:POSition
 :TIMebase:VERNier
:TIMebase:DELay:ENABle
Syntax
:TIMebase:DELay:ENABle <bool>
:TIMebase:DELay:ENABle?
Description
Turns on or off the delayed sweep; or queries the on/off status of the delayed sweep.
Parameter
Name
Type
Range
Default
<bool>
Bool
{{1|ON}|{0|OFF}}
0|OFF
Remarks
Delayed sweep can be used to enlarge a length of waveform horizontally to view
waveform details.
Return
Format
The query returns 1 or 0.
Example
:TIMebase:DELay:ENABle ON /*Enables the delayed sweep.*/
:TIMebase:DELay:ENABle? /*The query returns 1.*/
:TIMebase:DELay:OFFSet
Syntax
:TIMebase:DELay:OFFSet <offset>
:TIMebase:DELay:OFFSet?
Description
Sets or queries the offset of the delayed time base. The default unit is s.
Parameter
Name
Type
Range
Default
<offset>
Real
-(LeftTime - DelayRange/2) to (RightTime -
DelayRange/2)
0
Remarks
LeftTime = 5 × MainScale - MainOffset
RightTime = 5 × MainScale + MainOffset
DelayRange = 10 × DelayScale
Wherein, MainScale indicates the current main time base scale, MainOffset indicates
the current main time base offset, and DelayScale indicates the current delay time base

Rigol DS7024 Specifications

General

Brand	Rigol
Model	DS7024
Category	Test Equipment
Language	English