Rigol DS7024 User Programming Manual

Chapter 2 Command System RIGOL
MSO7000/DS7000 Programming Guide 2-165
:TRIGger:NREJect
Syntax
:TRIGger:NREJect <bool>
:TRIGger:NREJect?
Description
Turns on or off noise rejection; or queries the on/off status of noise rejection.
Parameter
Name
Type
Range
Default
<bool>
Bool
{{1|ON}|{0|OFF}}
0|OFF
Remarks
 Noise rejection reduces the possibility of the Noise trigger.
 This command is only available for the External trigger in which the analog
channel is selected as the source.
Return
Format
The query returns 1 or 0.
Example
:TRIGger:NREJect ON /*Enables the noise rejection function.*/
:TRIGger:NREJect? /*The query returns 1.*/
:TRIGger:EDGE
Command List:
 :TRIGger:EDGE:SOURce
 :TRIGger:EDGE:SLOPe
 :TRIGger:EDGE:LEVel
:TRIGger:EDGE:SOURce
Syntax
:TRIGger:EDGE:SOURce <source>
:TRIGger:EDGE:SOURce?
Description
Sets or queries the trigger source of Edge trigger.
Parameter
Name
Type
Range
Default
<source>
Discrete
{D0|D1|D2|D3|D4|D5|D6|D7|D8|D9|D10|D
11|D12|D13|D14|D15|CHANnel1|CHANnel2
|CHANnel3|CHANnel4|ACLine|EXT}
CHANnel1
Return
Format
The query returns D0, D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14,
D15, CHAN1, CHAN2, CHAN3, CHAN4, ACL, or EXT.
Example
:TRIGger:EDGE:SOURce CHANnel1 /*Sets the trigger source to CH1.*/
:TRIGger:EDGE:SOURce? /*The query returns CHAN1.*/
:TRIGger:EDGE:SLOPe
Syntax
:TRIGger:EDGE:SLOPe <slope>
:TRIGger:EDGE:SLOPe?
Description
Sets or queries the edge type of Edge trigger.
Parameter
Name
Type
Range
Default
<slope>
Discrete
{POSitive|NEGative|RFALl}
POSitive

Rigol DS7024 Specifications

General

Brand	Rigol
Model	DS7024
Category	Test Equipment
Language	English