Rigol DS7024 User Programming Manual

Chapter 2 Command System RIGOL
MSO7000/DS7000 Programming Guide 2-7
:BUS<n> Commands
The : BUS<n> commands are used to execute the decoding-related settings and operations.
Command List:
 :BUS<n>:MODE
 :BUS<n>:DISPlay
 :BUS<n>:FORMat
 :BUS<n>:EVENt
 :BUS<n>:EVENt:FORMat
 :BUS<n>:EVENt:VIEW
 :BUS<n>:LABel
 :BUS<n>:DATA?
 :BUS<n>:EEXPort
 :BUS<n>:POSition
 :BUS<n>:THReshold
 :BUS<n>:PARallel
 :BUS<n>:RS232 (Option)
 :BUS<n>:IIC (Option)
 :BUS<n>:SPI (Option)
 :BUS<n>:CAN (Option)
 :BUS<n>:FLEXray (Option)
 :BUS<n>:LIN (Option)
 :BUS<n>:IIS (Option)
 :BUS<n>:M1553 (Option)
:BUS<n>:MODE
Syntax
:BUS<n>:MODE <mode>
:BUS<n>:MODE?
Description
Sets or queries the decoding type of the specified decoding bus.
Parameter
Name
Type
Range
Default
<n>
Discrete
{1|2|3|4}
——
<mode>
Discrete
{PARallel|RS232|SPI|IIC|IIS|LIN|CAN|
FLEXray|M1553}
PARallel
Remarks
Except PARallel, all the other decodings are options. Only when the specified option is
installed, can the command is available.
Return
Format
The query returns PAR, RS232, SPI, IIC, IIS, LIN, CAN, FLEX, or M1553.
Example
:BUS1:MODE SPI /*Sets the type of the decoding bus to SPI.*/
:BUS1:MODE? /*The query returns SPI.*/

Rigol DS7024 Specifications

General

Bandwidth	200 MHz
Channels	4
Sample Rate	2 GSa/s
Vertical Sensitivity	1 mV/div to 10 V/div
Timebase Range	1 ns/div to 1000 s/div
Input Coupling	AC, DC, GND
Operating Temperature	0 °C to +50 °C
Display	10.1 inch
Vertical Resolution	8 bit
Trigger Types	Edge, Pulse, Video, Window
Serial Bus Triggering and Decoding	I2C, SPI, UART, CAN
Interfaces	USB, LAN, HDMI
Input Impedance	1 MΩ