Rockwell Automation Publication 6300P-UM001B-EN-P - March 2021 41
Chapter 6 Troubleshoot the System
3. Use the right (6) arrow to toggle over to the Save and Exit tab.
4. Use the down (2) arrow to toggle down and select a default option.
5. After you have selected the preferred UEFI setting, press F10 to save
and exit.
Ship or Transport the
Computer
If you must ship the computer via common carrier or otherwise transport it to
another location for service or any other reason, you must first uninstall the
monitor and place it in its original packing material.
Dispose of the Computer
You cannot dispose of computer equipment like other waste material. Most
computers and monitors contain heavy metals that can contaminate the earth.
Therefore, check with local health and sanitation agencies for ways to dispose
monitor equipment safely.
When a storage drive is part of what you plan to dispose, then erase any data
on it permanently or destroy the drive before it is disposed.
UEFI Setting Function
Restore Defaults Restores the default values for all set-up options.
Save as User Defaults Save the changes done already as user defaults.
Restore User Defaults Restores the user defaults to all set-up options.
Restore RealTime Defaults Restores the real-time default settings.
You can also press F9 to select Optimized Defaults.
IMPORTANT Do not ship or transport the computer when it is installed in a machine,
panel, or rack. To avoid damage to the computer, you must uninstall the
computer and place it in its original packing material before you ship it.
Rockwell Automation is not responsible for damage to a computer that is
shipped or transported while installed in a machine, panel, or rack.
At the end of its life, collect the computer separately from any unsorted municipal
waste.
To Next Page
Loading...
Need help?
General