Rockwell Automation FactoryTalk Batch User Manual

Chapter 5 FactoryTalk Batch View introduction
80
To resolve arbitration issues:
1. Select the Phase Control button. The Phase Control view opens and
displays the process cell.
2. Double-click the WEST_PARLOR icon, and then select the
WP_MIXER1 icon. A list of the phases within WP_MIXER1 are
displayed in the Phases section.
3. Select the WP_XFR_OUT icon, and then select the Acquire command
button. Select Yes to confirm the acquisition of the phase.
4. Select the Batch List button to go to the Batch List view.
5. Select the Add Batch command button, and then add a batch of
CLS_FRENCHVANILLA, binding to WP_MIXER1 and WP_FREEZER1
with a batch ID of TEST_5.
6. Start the batch, and then select the Procedure as SFC button. The
batch stops processing when it reaches the XFR_OUT:1 phase.
Tip: If the Command Signature dialog box opens, refer to Run a sample batch for
instructions.
7. Select the XFR_OUT:1 phase in the Procedural Hierarchy view. In the
SFC view, notice that the transition is stalled in ACQUIRING. In the
Auxiliary Index view, select the Arbitration tab and notice that the
phase needs WP_XFR_OUT_M1 and is owned by WP_XFR_OUT_M1.
8. Select the Phase Summary button. The Phase Summary window opens
and displays all the equipment phases and their associated status
information. This window is useful when trying to determine the state
of an equipment phase.

Rockwell Automation FactoryTalk Batch Specifications

General

Brand	Rockwell Automation
Model	FactoryTalk Batch
Category	Power Supply
Language	English