Chapter 5 FactoryTalk Batch View introduction
70
• The Auxiliary Index contains five tabs that display information
regarding the recipe, prompts, parameters, reports and arbitration
for the step that is selected in the Procedural Hierarchy or the SFC.
2. Spend a few moments adjusting the split bars to view the State column
in the Procedural Hierarchy area and to maximize the SFC.
As the batch runs, the steps listed in the Procedural Hierarchy that are being
executed display in green and the State column indicates RUNNING. In the
SFC, the steps being executed also display in green. Notice also that
WP_MIXER2 and WP_FREEZER2 are indicated in the SFC as the phases
being used in the batch.
You can navigate the batch by selecting on the unit procedure, operation, or
phase either in the Procedure Hierarchy or the SFC.
To navigate the SFC:
1. Double-click the CLS_SWEETCREAM_UP:1 box in the SFC to go to the
Unit Procedure (UP) level. There is one operation within the unit
procedure: CLS_SWEETCREAM_OP:1.
Notice the green arrow in the Procedural Hierarchy points to the Unit
(UP) level. The green color in the SFC indicates that the operation is
running.
Navigate the SFC
To Next Page
Loading...
Need help?
General
