Rockwell Automation MD60 User Manual

8-2 MD60 AC Drive User Manual
8.1.1 Display Description
The alpha-numeric display indicates the following:
• Parameter number
• Parameter value
• Fault code
8.1.2 LED Descriptions
Refer to figure 8.1 for the location of the LEDs described in table
8.1.
Table 8.1 – LED Descriptions
No. LED LED State Description
➊
RUN Steady Red Indicates the drive is running.
➋
FWD
REV
Flashing
Red
Drive has been commanded to
change direction. Indicates actual
motor direction while decelerating
to zero.
Steady Red Indicates the commanded motor
direction.
➌
VOLTS
AMPS
HERTZ
Steady Red Indicates the units of the
parameter value being displayed.
➍
PROGRAM Steady Red Indicates the drive is in program
mode and the parameter value
can be changed.
➎
FAULT Flashing
Red
Indicates drive is faulted.
➏
Pot Status Steady
Green
Indicates potentiometer on
integral keypad is active.
➐
Start Key Status Steady
Green
Indicates Start key on integral
keypad is active. The Reverse key
is also active unless disabled by
A095 (Reverse Disable).

Rockwell Automation MD60 Specifications

General

Brand	Rockwell Automation
Model	MD60
Category	DC Drives
Language	English