Parameter Descriptions 9-31
The status of the communications device.
The Main Control Board software version.
Used by Rockwell Automation field service personnel.
The accumulated time drive is outputting power. The time is
displayed in 10-hour increments (that is, 1 = 10 hours).
d015 Comm Status
Range: 0 = Condition False
1 = Condition True
See figure 9.14.
Default: Read Only
See also: A103 through A107
Figure 9.14 – Comm Status (d015) Bit Definitions
Receiving Data Bit 0
Transmitting Data Bit 1
RS485 Option Connected Bit 2
Fault Occurred Bit 3
d016 Control SW Version
Range: 1.00 to 99.99
Default: Read Only
See also: N/A
d017 Drive Type
Range: 1001 to 9999
Default: Read Only
See also: N/A
d018 Elapsed Run Time
Range: 0 to 9999 Hours
Default: Read Only
See also: N/A
To Next Page
Loading...
Need help?
General
