Publication 2711P-UM001I-EN-P - December 2008 51
Power Connections Chapter 3
DC Power Connections
PanelView Plus terminals with an integrated, 24V DC power supply
have these power ratings
The power supply is internally protected against reverse polarity of
the DC+ and DC- connections. Connecting DC+ or DC- to the earth
terminal may damage the device.
The input power terminal block is removeable and supports these
wire sizes.
Wire Specifications for DC Power Terminal Block
Power Type Terminal Input Range
DC
400 and 600 24V DC nom (18…30 V DC)
25 W max (1.0 A at 24V DC)
700 to 1500 24V DC nom (18…32 V DC)
70 W max (2.9 A at 24V DC)
Terminal Wire Type
Dual-wire
Gauge
(1)
Single-wire
Gauge
Terminal Screw
Torque
400 and 600
Stranded
or solid
Cu 90 °C (194 °F) 22…16 AWG 22…14 AWG
0.45…0.56 Nm
(4…5 lb•in)
700 to 1500 logic module
series A to D
0.23…0.34 Nm
(2…3 lb•in)
700 to 1500 logic module
series E and later
0.56 Nm (5 lb•in)
(1)
Two-wire max. per terminal.
To Next Page
Loading...
Need help?
General
