PowerFlex Digital DC Drive User Manual - Publication 20P-UM001C-EN-P - July 2008
HIM Overview B-5
Preferences Menu
The HIM and drive have features that you can customize.
Viewing and Editing
Parameters
LCD HIM
Numeric Keypad Shortcut
If using a HIM with a numeric keypad, press the ALT key and the +/– key to
access the parameter by typing its number.
Option Description
Drive Identity Add text to identify the drive.
User Dspy Lines Select the display, parameter, scale and text for the User
Display. The User Display is two lines of user-defined data
that appears when the HIM is not being used for
programming.
Step Key(s) Example Displays
1. In the Main Menu, press the Up Arrow or
Down Arrow to scroll to “Parameter.”
2. Press Enter. “FGP File” appears on the
top line and the first three files appear
below it.
3. Press the Up Arrow or Down Arrow to
scroll through the files.
4. Press Enter to select a file. The groups
in the file are displayed under it.
5. Repeat steps 3 and 4 to select a group
and then a parameter. The parameter
value screen will appear.
6. Press Enter to edit the parameter.
7. Press the Up Arrow or Down Arrow to
change the value. If desired, press Sel
to move from digit to digit, letter to letter,
or bit to bit. The digit or bit that you can
change will be highlighted.
8. Press Enter to save the value. If you
want to cancel a change, press Esc.
9. Press the Up Arrow or Down Arrow to
scroll through the parameters in the
group, or press Esc to return to the
group list.
Sel
Esc
or
or
or
or
FGP: File
Monitor
Motor Control
Speed Command
FGP: Par 499
Fld Economy En
1
Enabled
FGP: Group
Motor Data
Field Config
Torq Attributes
FGP: Parameter
Field Reg Enable
Fld Economy En
Field Mode Sel
FGP: Par 499
Fld Economy En
0
Disabled
To Next Page
Loading...
Need help?
General
