Rockwell Automation PowerFlex series User Manual

PowerFlex Digital DC Drive User Manual - Publication 20P-UM001C-EN-P - July 2008
Programming and Parameters 3-11
Monitor File
File Group No.
Parameter Name & Description
See page 3-2 for symbol descriptions
Values
Related
MONITOR
Speed Meters
44 [Speed Ref A]
First speed reference for the drive. Negative values apply to four
quadrant drives only.
Note: This parameter is assigned to analog input 1 (terminals 1
& 2, Par 70 [Anlg In1 Sel]) by default, but can be assigned to any
analog input.
Default:
Min/Max:
Units:
Read Only
–/+ Par 45 [Max Ref Speed]
(1)
RPM
45
(1)
The value of [Max Ref Speed] cannot exceed 8192 RPM.
47 [Speed Ref A Pct]
First speed reference for the drive as a percentage of the value
defined in Par 45 [Max Ref Speed].
Default:
Min/Max:
Units:
Read Only
–/+100.00
%
45
48 [Speed Ref B]
Second speed reference for the drive. Negative values apply to
four quadrant drives only.
Note: This parameter can be assigned to an analog input.
Default:
Min/Max:
Units:
Read Only
–/+ Par 45 [Max Ref Speed]
(1)
RPM
45
(1)
The value of [Max Ref Speed] cannot exceed 8192 RPM.
49 [Speed Ref B Pct]
The second speed reference for the drive as a percentage of the
value defined in Par 45 [Max Ref Speed].
Default:
Min/Max:
Units:
Read Only
–/+100.00
%
45
110 [Ramp In]
Total reference value input to the ramp in RPM.
Note: This parameter can be assigned to an analog output.
Default:
Min/Max:
Units:
Read Only
–/+32766
RPM
111 [Ramp In Pct]
Total reference value input to the ramp as a percentage of Par
45 [Max Ref Speed].
Note: This parameter can be assigned to an analog output.
Default:
Min/Max:
Units:
Read Only
–/+100.00
%
45
113 [Ramp Out]
Output of the ramp in RPM.
Note: This parameter can be assigned to an analog output.
Default:
Min/Max:
Units:
Read Only
–/+32766
RPM
114 [Ramp Out Pct]
Output of the ramp as a percentage of Par 45 [Max Ref Speed].
Default:
Min/Max:
Units:
Read Only
–/+100.00
%
45
117 [Speed Reg In Pct]
Total reference value input to the Speed Regulator as a
percentage of Par 45 [Max Ref Speed].
Default:
Min/Max:
Units:
Read Only
–/+100.00
%
118 [Speed Reg In]
Total reference value input to the Speed Regulator in RPM.
Note: This parameter can be assigned to an analog output.
Default:
Min/Max:
Units:
Read Only
–/+32766
RPM
121 [Spd Feedback Pct]
Actual speed as a percentage of the Par 45 [Max Ref Speed].
Note: This parameter is assigned to analog output 1 (terminals
21 and 22, Par 66 [Anlg Out1 Sel]) by default, but can be
assigned to any analog output.
Default:
Min/Max:
Units:
Read Only
–/+100.00
%
45,
923
122 [Spd Feedback]
Actual speed in RPM.
Default:
Min/Max:
Units:
Read Only
–/+32766
RPM
384 [Spd Ref Out Pct]
Output of the Speed Reference selection as a percentage of Par
45 [Max Ref Speed].
Default:
Min/Max:
Units:
Read Only
–/+100.00
%
45
385 [Speed Ref Out]
Output of the Speed Reference selection.
Default:
Min/Max:
Units:
Read Only
–/+32766
RPM
420 [Encoder Speed]
Actual speed measured by the digital encoder.
Default:
Min/Max:
Units:
Read Only
–/+8192
RPM
414

Rockwell Automation PowerFlex series Specifications

General

Brand	Rockwell Automation
Model	PowerFlex series
Category	DC Drives
Language	English